Yueqing Ying's Import & Export Co., Ltd.
Main products:PLC,HMI,Rotary Encoder,Sensor,Slip Ring
Contact Us
  • Contact Person : Mr. Ying Benjamin
  • Company Name : Yueqing Ying's Import & Export Co., Ltd.
  • Tel : 0086-577-62791815
  • Fax : 0086-577-62791825
  • Address : Zhejiang,Yueqing City,ROOM 602, NO.252 LIUQING NORTH ROAD, LIUSHI, YUEQING, ZHEJIANG, 325604 CHINA
  • Country/Region : China
  • Zip : 325604

ENC-1-1-T-24 Wheel type rotary encoder

ENC-1-1-T-24 Wheel type rotary encoder
Product Detailed
ENC-1-1-T-24 Wheel type rotary encoder

Incremental measuring wheel type Rotary Encoder  

ENC Series


Suitable for measuring the length or speed of target moving successively by wheel type

The output waveform is proportional to the unit of international measurement type (meter or inch)

Power supply: 5VDC, 12-24VDC ±5%


Packing machine, sheet manufacturing,

Textile machinery and general industrial plants.



Incremental measuring wheel type Rotary Encoder 

ENC Series


Refer to resolution(Next page)

Output phase

A,B phase

Phase different of output

Phase different between A and B: T/4±T/8(T=1 cycle of A phaqse)

Control output

Totem pole output

Low→Load current: Max, 30mA, Residual voltage: Max.0.4VDC

High→Load current: Max. 10m A, Output voltage (power supply 5VDC): Min. (Power supply-2.0)VDC. Output voltage (Power supply 12-24VDC): Min. (Power supply-3.0) VDC.

NPN open collector output

Load current: Max, 30mA, Residual: Max.0.4VDC

Voltage output

Load current: Max, 10mA, Residual: Max.0.4VDC

Response time (Rise/Fall)

Totem pole output

Max. 1us

Measuring condition→Cable length: 2m, 1 sink=Max. 20mA

NPN open collector output

Max. 1us

Voltage output

Max. 1us

Line driver output

Max. 0.5us

Max. Response frequency


Power supply

5VDC±5% (Ripple P-P: Max. 5%)  12 -24VDC±5% (Ripple P-P: Max. 5%)

Current consumption

Max.80mA (Disconnection of the load)

Insulation resistance

Min. 100MΩ (at 500VDC mega Between all terminals ad case)

Dielectric strength

750VAC 50/60Hz for 1 minute (Between all terminals ad case)


Cable outgoing type, 250mm cable outgoing connector type

Starting torque

Depend on coefficient of friction

Rotor inertia


Shaft loading

Radial: Max. 2kgf, Thrust: Max. 1kgf

Max. allowable revolution



1.5mm amplitude at frequency of 10-55 Hz in each of X,Y, Z direction for 2 hours.


Max. 75G

Ambient temperature

-10~70 (at non-freezing status), Storage:-25~85

Ambient humidity

35~85%RH, Storage: 35~90%RH


IP50 (IEC standard)


5mm, 5P, Length: 2mm, shield cable

Unit weight

Approx: 495g



ENC-1-1-T-24 Wheel type rotary encoder

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.